Call us 24/7+86 19066591275
Email：abbdcs36@gmail.com
Call us 24/7+86 19066591275

Category: Industry trends

Home / Industry trends (Page 3)
2024-12-06 BY
IN Industry trends

GE IC695ALG508 Analog Input Module

Here are the parameter details of the GE IC695ALG508 in English:

Overview

  • Model: IC695ALG508
  • Manufacturer: GE (General Electric)
  • Series: PACSystems RX3i
  • Type: Analog Input Module for Resistance Temperature Detectors (RTDs)

Key Features and Specifications

  • Number of Channels: 8 isolated differential RTD input channels.

  • Supported RTD Types:

    • Platinum 385 (50, 100, 200, 500, 1000 ohms)
    • Platinum 391.6 (50, 100, 200, 500, 1000 ohms)
    • Nickel 672
    • Nickel 618 (100, 200, 500, 1000 ohms)
    • Nickel-Iron 518
    • Copper 426
    • Directly compatible with resistance inputs such as 0-260, 0-525, 0-1050, 0-2100, 0-3150, 0-4200 ohms.

  • Measurement Range: Generally supports a temperature range from -200°C to +850°C, depending on the RTD sensor type.

  • Resolution: 16-bit resolution for high accuracy temperature measurement.

  • Linearization: Built-in linearization function to automatically convert RTD signals into actual temperature values.

  • Wire Compensation: Supports wire compensation to eliminate measurement errors caused by RTD wire resistance.

  • Self-Diagnostic Capabilities: Supports sensor open-circuit detection and system fault detection.

  • Electrical Isolation: Provides electrical isolation between channels and the system to enhance anti-interference capabilities and improve system reliability.

  • Configuration Flexibility: Parameters such as RTD type, input range, and sampling rate can be flexibly configured using GE Fanuc’s programming tools.

  • Installation: Designed to be installed in the RX3i rack, supporting DIN rail or rack mounting.

  • Interface: Connects to external RTD sensors using standard wiring terminals.
2024-12-06 BY
IN Industry trends

Bently Nevada 3500/44M 176449-03 module

The Bently Nevada 3500/44M 176449-03 is a part of the Bently Nevada 3500 Series Machinery Protection and Monitoring System, which is used in industrial applications to monitor critical machinery health and prevent unplanned downtime. The 3500/44M module specifically functions as a Dynamic Pressure Transducer Interface module, which is used to interface with dynamic pressure transducers (such as those monitoring gas or liquid pressure) and deliver real-time monitoring and protection for machinery.

Key Features and Specifications

Model:

  • Bently Nevada 3500/44M
  • Part Number: 176449-03

Electrical Specifications:

  • Power Supply:
    • Typically powered by the 3500 rack system, which provides 24V DC.
  • Inputs:
    • Accepts signals from dynamic pressure transducers.
    • These signals are typically voltage or current signals proportional to pressure.
  • Output:
    • Processes and outputs the signals to the 3500 rack system for monitoring purposes.

Key Features:

  1. Real-time Dynamic Pressure Monitoring:
    • Provides continuous dynamic pressure monitoring and analysis for machinery, ensuring early detection of issues.
  2. Signal Conditioning:
    • The module conditions the input signals from dynamic pressure transducers, making them suitable for monitoring and analysis.
  3. Alarming and Protection:
    • The module can trigger alarms and shutdowns if pressure conditions exceed predefined thresholds, providing machinery protection and preventing damage.
  4. Integration:
    • Fully integrates with the 3500 series rack and controller, enabling centralized monitoring and configuration.
  5. Diagnostics:
    • Includes built-in diagnostic capabilities to help identify module and transducer issues, which can be used for predictive maintenance.

Physical Specifications:

  • Mounting:
    • Typically mounted in a standard 3500 series rack, which can accommodate multiple monitoring modules for large systems.

Environmental Specifications:

  • Operating Temperature:
    • -40°C to +70°C (-40°F to 158°F), which is typical for industrial-grade protection systems.
  • Storage Temperature:
    • -40°C to +85°C (-40°F to 185°F), suitable for storage in varied conditions.
  • Humidity:
    • Operates reliably in up to 95% non-condensing humidity.
  • Vibration Resistance:
    • Designed to withstand vibrations common in industrial machinery applications.
2024-12-04 BY
IN Industry trends

HONEYWELL 51401497-100 FW25-92 power supply

The Honeywell 51401497-100 FW25-92 is a robust industrial power supply designed for demanding applications, particularly in automation and process control. Here are its key specifications:

  • Input Voltage Range: 85-264V AC.
  • Output Voltage: 12V DC.
  • Output Current: 10A.
  • Efficiency: 92%, ensuring energy-efficient operation.
  • Operating Temperature: -40°C to +70°C, suitable for extreme environments.
  • Protection Features: Includes overvoltage, overcurrent, and short-circuit protection for enhanced reliability.
  • Certifications: Compliant with UL, CE, and FCC standards.
  • Dimensions and Weight: 120mm x 15mm x 110mm, weighing approximately 0.3kg.
  • Special Features: Dual-node architecture for redundancy and continuous operation during a node failure
2024-12-04 BY
IN Industry trends

ABB PP885 3BSE069276R1 Touch screen

The ABB PP885 3BSE069276R1 is a touchscreen Human-Machine Interface (HMI) typically used in industrial automation systems to provide an intuitive interface for operators to interact with control systems. Here are the general specifications and features of this model:

Key Specifications:

  1. Display:
    • Type: TFT color touchscreen.
    • Size: Typically around 8 to 15 inches, depending on the specific variant.
    • Resolution: High resolution for clear visibility of control graphics and data (often 800×600 or 1024×768 pixels).
    • Brightness: Adjustable, designed for readability in varying lighting conditions.
  2. Touch Technology:
    • Touch Type: Capacitive or resistive touchscreen technology (depending on the model).
    • User Interface: Supports multi-touch or single-touch input for intuitive control.
  3. Connectivity and Communication:
    • Communication Protocols: Includes industrial communication protocols such as Modbus, Profibus, and Ethernet/IP.
    • Ports: Typically includes RS-232, RS-485, and Ethernet ports for integration with PLCs and other control systems.
  4. Input/Output (I/O):
    • Input Devices: Touchscreen inputs for user interactions, keyboard, or external I/O devices.
    • Output: Visual feedback on the screen, often supporting custom control panels and data displays.
  5. Operating Environment:
    • Temperature: Typically operates between 0°C to 50°C.
    • Protection: Often rated IP65 or higher, making it suitable for industrial environments where dust and water resistance are necessary.
  6. Power Supply:
    • Voltage: Commonly operates on 24 VDC, with a power consumption around 20-30 W depending on the size and features.
  7. Mounting and Dimensions:
    • Mounting: Suitable for panel mounting, often using a flush or surface-mount method.
    • Size: Designed for integration into standard control panels, with varying dimensions based on screen size.

Features:

  • User-Friendly Interface: Designed for ease of use with customizable display options, graphical controls, and data visualization.
  • Advanced Visualization: Enables operators to monitor system status, adjust parameters, and troubleshoot through graphical representations and status indicators.
  • Flexible Configuration: Can be configured for various industrial applications and integrated with ABB’s automation systems or third-party PLCs.
  • Reliability: Built for industrial environments with high durability, capable of withstanding vibration, temperature variations, and other harsh conditions.

Applications:

  • Industrial Automation: Used in manufacturing lines, process control, and robotic systems for operator interaction.
  • Machine Control: Provides a central control interface for machines, offering monitoring and control functions.
  • Energy and Utilities: Common in control rooms for managing systems such as energy distribution, water treatment, and similar facilities.
2024-12-04 BY
IN Industry trends

ABB ACU-01B 3HNA024871-001 controller

The ABB ACU-01B 3HNA024871-001 is a controller used in industrial applications, typically for automation systems, particularly in processes like motor control or automation of machinery. While detailed specifications might vary based on specific configurations, here are the general features and specifications:

Key Specifications:

  1. Power Supply:
    • Input Voltage: 24 VDC.
    • Power Consumption: Typically low (specific details may depend on connected devices or modules).
  2. Communication Interfaces:
    • Fieldbus Compatibility: Supports various industrial protocols, likely including Modbus, Profibus, or Ethernet/IP (specific protocol support can vary).
    • Communication Ports: RS-485/RS-232 for serial communication.
  3. Inputs and Outputs:
    • Digital Inputs: Typically for control signals (e.g., on/off status).
    • Digital Outputs: For controlling actuators or external equipment.
    • Analog I/O: Supports analog signals for continuous measurement (e.g., 4-20 mA for sensor input).
  4. Operating Conditions:
    • Operating Temperature: Typically -20°C to +60°C, depending on the model.
    • Protection Rating: Likely to be IP20, meaning it’s intended for indoor use in environments where it’s protected from dust and moisture.
  5. Mounting and Size:
    • Mounting Type: DIN rail or panel mounting.
    • Dimensions: Generally compact to save space in control panels or cabinets.
  6. Control Features:
    • Control Algorithms: Suitable for process control, motor control, or similar tasks.
    • Programmability: Often programmable through ABB’s proprietary software or through external configuration tools.
2024-12-03 BY
IN Industry trends

bently 3500/22M 138607/01 146031-01 module

Product details

The Bentley Nevada 3500/22M is a key module in the 3500 Series vibration monitoring and protection system to provide the communication interface and system configuration functions required by the system. The following are the details of its parameters:

Basic information

Module model: 3500/22M
Function: System Monitor module for configuring and managing communication and status indicators for the entire 3500 series system.

Hardware parameter

Communication interface:

Supports a variety of communication protocols, including:
Modbus RTU (RS-232/RS-485 serial interface)
Modbus TCP (Ethernet Interface)
1 to 4 communication ports (the number of ports depends on module configuration).
Supports dual Ethernet ports (redundant network support).

Indicator light and display:

Equipped with multi-color LED indicator to display system operating status:
OK (normal)
TX/RX (Communication status)
It’s FAULT.
Direct visualization of running status.

Power requirements:

Input voltage: 24V DC
Power consumption: about 4 W

Physical parameters:

Size: 6 “x 3.5” x 1 “(standard 3500 module size).
Installation: Supports 19-inch rack installation.

Storage and processing:

Built-in non-volatile memory for storage of system configuration data.
Supports firmware upgrade.

Functional characteristics

System Management:

As the core module of the 3500 series system, it manages and coordinates the communication and functions of other modules.
Configure key system operation parameters.

Communication redundancy:

Support dual Ethernet redundancy to ensure communication reliability and real-time.
It can be integrated with external DCS and SCADA systems through the network.

Multi-protocol support:

Provides support for standard industry protocols, such as Modbus, for easy interworking with third-party systems.
Realize remote monitoring and data acquisition.

Diagnosis and alarm:

Real-time detection of system health, providing alarm and event recording functions.
Diagnose system communication faults and display fault status.

Flexible configuration:

Use Bentley Nevada’s System 1 Software or 3500 Configuration Software for configuration.
Supports multiple system architectures to meet different industrial needs.
2024-12-03 BY
IN Industry trends

GE IS210MACCH1AKH Gas turbine module

The GE IS210MACCH1A is a module in General Electric’s Mark VI or Mark VIe control systems, commonly used in control systems for gas turbines, steam turbines and other industrial applications. The following are the main parameters and functions of the module:
Basic information
Model: IS210MACCH1A
Function: Main processing module for data acquisition and control operations.
Application system: GE Mark VI/VIe control system.
Hardware parameter
Processing capacity:
High-performance microprocessor for real-time industrial control tasks.
Supports multi-threading and real-time data processing.
Memory:
High-speed random access memory (RAM).
Integrated flash memory for firmware and program storage.
Interface support:
Multiple digital and analog I/O interfaces for integration with other modules or devices.
Communication port: Support Ethernet, serial communication (such as RS-232/RS-485).
Power requirements:
Working voltage: 24V DC.
Power consumption: Typical values of about 5-10W.
Physical characteristics:
Size: Modular design, according to Mark VI control system standard frame size.
Weight: About 0.5-1.0kg.
Functional characteristics
Data acquisition and processing:
Supports high-speed data acquisition for real-time monitoring and control.
Process data input from other control modules or sensors.
Communication capability:
Supports a variety of industrial communication protocols (such as Modbus, Ethernet/IP).
Can be integrated with GE Mark VI/VIe’s HMI and other peripherals.
Modular design:
It can be combined with other GE control modules to form a complete control system.
Easy to replace and upgrade.
Diagnosis and fault detection:
Supports online diagnosis and status monitoring.
Provides detailed error logging and alarm functions.
Real-time control:
Ensure real-time and high precision control tasks.
It can be used for critical process control, such as combustion control of gas turbines.
Operating environment
Temperature range:
Operating temperature: 0°C to 55°C.
Storage temperature: -40°C to 70°C.
Humidity range:
Relative humidity: 5%-95% (non-condensing).
Anti-interference ability:
Comply with industrial electromagnetic compatibility (EMC) standards.
Durability:
Vibration and shock resistant design for industrial sites.
2024-12-02 BY
IN Industry trends

ABB PFTL101B 3BSE004185R1 2.0KN Tension sensor

Product Details:

The ABB PFTL101B 3BSE004185R1 2.0KN is a tension sensor for industrial automation and control systems, widely used in areas where tension needs to be measured, such as paper, metal working, textile, plastic film and other manufacturing processes. The following is the detailed parameter and function description of the sensor:

1. Basic parameters

Model: PFTL101B 3BSE004185R1
Rated load: 2.0 kN (2000 N, indicating a maximum load of 2,000 Newtons)
Measurement principle: Strain gauge technology is used for tension measurement, and the sensor has a strain gauge element inside to convert the tension value into an electrical signal.
Measuring range:
It is suitable for high precision tension measurement and is often used in precision process control.
It usually has a wide measuring range, such as ±20% rated load, but the specific value needs to be confirmed according to the use conditions and actual needs.

2. Electrical parameters

Supply voltage:
The usual supply voltage is 10-30 VDC, in line with industry standards.
Output signal:
Analog output signal, usually 4-20 mA or 0-10 V (depending on model and configuration).
Other possible signal output options: 0-5 V, 0-20 mA, etc.
Sensitivity:
The output signal changes in proportion to the measured tension, and the sensitivity is usually 2 mV/V, the specific value needs to refer to the product specification.
Impedance:
The input impedance is typically 350 Ω (typical strain gauge sensor standard), which is suitable for standard control and data acquisition systems.
Output resolution:
High precision output with 16-bit or higher resolution to ensure accurate measurement results.

3. Mechanical and installation parameters

Size:
The sensor has a compact design for easy installation into existing equipment, and the specific dimensions can be found in the user manual.
Installation method:
Common mounting methods include direct mounting or mounting through a bracket, usually in an axial mounting configuration to measure the tension of the material.
Mounting holes and interfaces meet industry standards for easy integration into production lines or other equipment.
Rated load: 2.0 kN (2,000 N), meaning that the maximum tension that the sensor can measure is 2,000 Newtons.
Overload capacity: It is usually able to withstand short-term overload exceeding the rated load, and the overload capacity is generally 1.5 to 2 times of the rated load.

4. Environmental adaptability

Operating temperature range:
The operating temperature range is usually -20°C to +70°C, suitable for most industrial environments.
Storage temperature range:
From -40°C to +85°C, suitable for environments during storage and transport.
Humidity:
Relative humidity: 10% to 95%, no condensing moisture.
Anti-seismic and anti-interference:
Designed to meet industrial seismic requirements and adapt to vibration environments, especially for high-speed production lines and heavy load applications.
Good electromagnetic compatibility (EMC) to avoid external electromagnetic interference affecting sensor performance.

5. Features and functions

High accuracy and stability:
Provides high precision tension measurement for precision process control.
High quality strain gauge technology ensures linearity and stability of the output signal.
Durability:
The rugged material is suitable for harsh industrial environments and long running times.
Low power design:
The design features low power consumption and is suitable for integration with low power control systems.
Response speed:
Fast response time to monitor tension changes in real time and adapt to the application needs of high-speed production processes.
2024-12-02 BY
IN Industry trends

Terasaki ESM-103 B Circuit board module

Terasaki ESM-103B is a circuit board assembly that is commonly used as part of protection and control systems in a wide range of industrial equipment and power distribution systems. This circuit board is usually used in switchgear or power control units. The following is a description of some parameters and functions of the ESM-103B board:
1. Basic functions
Device type: Control board/protection module.
Purpose:
Monitor and control the operating status of electrical equipment.
Provides protection functions (such as overload protection and short circuit protection).
Logic control unit for low-voltage circuit breakers.
2. Electrical parameters
Input voltage:
Common range: 24VDC or 110VAC (depending on application).
Signal support:
Analog signal: Used for condition monitoring or sensor input.
Digital signal: Used for switch control and alarm.
Power consumption:
Low power design, usually in the range of a few watts.
3. Functions and features
Protection function:
Overcurrent protection.
Short circuit protection.
Overvoltage/undervoltage monitoring.
Control function:
Logic control unit that provides switching operation and status feedback.
Supports remote operation and status display.
Communication function:
External devices can be connected, such as display units or control modules.
Provides a diagnostic signal interface for device status analysis.
4. Environmental adaptability
Working temperature:
Typical range: 0°C to +55°C.
Storage temperature:
-20°C to +70°C.
Anti-interference:
Comply with industrial electromagnetic compatibility (EMC) standards, resistant to electromagnetic interference.
2024-12-02 BY
IN Industry trends

ICS TRIPLEX T9110 Processor module

1. Module type

Name: Module T9110
Type: Processor Module
Features:
Provides system logic control and fault detection.
Supports high availability and triple module redundancy (TMR).

2. Processing power

Architecture: Triple Modular Redundancy (TMR).
Three independent processing units run simultaneously and vote on a mechanism to determine the final output.
Provides extremely high fault tolerance and reliability.
Processing speed: real-time processing, support high frequency data acquisition and logical operations.
Memory:
Provides non-volatile memory with sufficient capacity for storing logical programs and historical data.
Supports efficient access to dynamic and static data.

3. Communication function

Network interface:
Provides communication with other modules, workstations, and external devices.
Supports redundant communication networks to enhance system reliability.
Protocol support:
Modbus, Ethernet/IP, TCP/IP.
Supports integration with DCS, SCADA or PLC systems.
Interface type:
Support serial communication and Ethernet interface, specific configuration according to the module.

4. Power and power consumption

Input voltage:
It is usually 24VDC (see the manual for the specific voltage range).
Power consumption:
Low power consumption, but depends on system configuration.

5. Environmental adaptability

Working temperature:
Typical industrial temperature range: 0°C to +60°C.
Storage temperature:
-40°C to +85°C.
Protection level:
IP20 (module itself), suitable for industrial cabinet installation.
Anti-seismic and anti-interference:
Meet stringent industrial environmental standards such as IEC and ANSI standards.

Menu
Call us 24/7+86 19066591275

Search for products

Back to Top
Product has been added to your cart
phone: +86 19066591275
to whats
+8619066591275
email: abbdcs36@gmail.com