The ABB 5SHY3545L0010 is a variable frequency drive (VFD) module from ABB’s ACS355 series, designed for controlling the speed of three-phase induction motors in a wide range of industrial applications. Below are the detailed specifications and features of this module:
ABB 5SHY3545L0010 – Key Specifications
- Motor Control:
- Control Method: Provides voltage/frequency (V/f) and sensorless vector control (SLVC) for three-phase induction motors.
- The sensorless vector control enables high performance in applications requiring precise speed and torque control, even in demanding load conditions.
- Power Supply:
- Input Voltage: Typically supports 200–240V AC or 380–480V AC (depending on model configuration).
- Frequency: Works with an input frequency range of 50–60 Hz.
- Output Frequency: The output frequency range typically ranges from 0 to 550 Hz, depending on the application requirements.
- Output Power Rating:
- The 5SHY3545L0010 variant typically supports up to 4 kW (5 hp) motor power, making it suitable for small to medium industrial motor control applications.
- Current Rating:
- Nominal Output Current: Typically rated at 8.2 A at 400V, providing ample current for medium-sized motors.
- Peak Output Current: The module can handle peak currents higher than the nominal rating for short durations, which is important during startup or when handling transient conditions.
- Efficiency:
- Designed for high efficiency, offering energy-saving operation by optimizing motor performance.
- Energy Efficiency Standards: Meets IEC 61800-9-2 standards for energy efficiency in variable frequency drives.
- Communication:
- Integrated Communication Protocols: The ACS355 supports a variety of fieldbus communication protocols, including Modbus RTU, CANopen, and Ethernet/IP for easy integration with control systems, PLCs, and SCADA systems.
- Protection Features:
- The drive includes advanced protection features such as:
- Overcurrent Protection
- Overvoltage and Undervoltage Protection
- Overtemperature Protection
- Short Circuit Protection
- Ground Fault Protection
- The drive includes advanced protection features such as:
- Environmental Conditions:
- Operating Temperature Range: Typically -10°C to +50°C (14°F to 122°F), with derating required above 40°C (104°F) for optimal performance.
- Humidity: Operates in environments with a relative humidity of up to 95% (non-condensing).
- Enclosure: Typically enclosed in an IP20 (dust-protected) or IP21 (drip-proof) rated housing, depending on the model variant.
ABB 5SHY3545L0014 | 3BHE019719R0101 | High-Performance Frequency Converter
Leave a comment
Your email address will not be published. Required fields are marked *